available furnace technology

Gas fired Chamber Kiln 1440°C (rapid firing):

net dimensions: 0,9 x 0,5 x 0,55 m3 (WxTxH); firing temperature: max. 1440 °C

  • min. cycle time (cold/cold): 90 min to 1100 °C; 120 min to 1400 °C
  • oxidizing and reducing atmosphere
  • possibility to add separate O2
  • automatic registration of temperature and atmosphere conditions (O2, CO2 und CO)

Gas fired Chamber Kiln 1300°C:

  • net dimensions: 0,5 x 0,6 x 0,8 m³ (WxTxH)
  • firing temperature: max. 1300°C
  • min. cycle time (cold/cold): 4 h
  • oxidizing firing
  • thermal afterburning

Gas fired Chamber Kiln 1600°C:

  • net dimensions: 1,0 x 0,45 x 0,6 m³ ³ (WxTxH)
  • firing temperature: max. 1600°C
  • min. cycle time (cold/cold): ca 20 h
  • firing system: IVF (Infinite Variable Flash Firing)
  • control type: modulating, impulse
  • oxidizing and reducing atmosphere
  • thermal afterburning
  • possibility to add separate O2
  • computer control of temperature, atmosphere (O2, CO2, CO) and pressure in the furnace chamber
  • data capture of relevant parameters
  • data transfer to other systems as ASCII-File

Electrical heated Chamber Kiln Typ SO 1093;

  • Firing temperature: 1380°C
  • gas-tight designs with thermal afterburning
  • free programmable heating and cooling < 1100 °C
  • net dimensions: 350 x 350 x 400 mm³

Electrical heating Gradient Kiln:

  • firing temperature: max. 1250 °C
  • 6 temperature segments, all free programmable in temperature-time-profile
  • effective section dimension (WxTxH) ca. 150 x 150 x 80 mm³

Electrical heating High Speed Kiln type HTM:

  • Firing temberature: max. 1550 °C
  • Heating rate min. ca. 30 min form cold to cold; to heat to 1200°C in 4 h is possible
  • Especially suitable for tile firing
  • Net dimension for example for two tiles 250 x 200 mm2
  • Furnace chamber is variable to approx. 100 mm

Electrical heating Lift Floor Kiln for Rapid Firing 1800°C:

  • Net dimension: 300 x 230 x 200 mm3
  • Firing temperature: max. 1800 °C
  • Permanent working temperature: 1730 °C
  • Max. heating rate: 15 K/min

Electrical heating Laboratory Firing Aggregates:

  • in 9-KW-kiln to 1350°C
  • in high temperature kiln to 1600°C
  • in high temperature kiln to 1750°C

Contact: Dipl.-Ing. Michael Bormann

Phone: +49 3521 463531

Contact: Dr.-Ing. Jens Petzold

Phone: +49 3521 463515